Product Code: TWVTER-PK50
Availability: In Stock
£30.43
Ex.Vat £25.36

Timloc Weep Vents Terracotta Box 50

Multi-function products for discharging water from external walls

Use

  • Any situation where water must be discharged from an external wall, e.g:
  • Ventilating cavity voids
  • At ground floor slab level
  • Within cavity tray systems
  • Over external lintels
  • Where a cavity must be ventilated
  • On external walls – 100mm or more in thickness – built from brick, block or stone.

Features & benefits

  • Purpose made and pre-formed to guarantee reliable discharge of water
  • Free vent area 165mm2 for part code 1143
  • Less prone to inadvertent pointing-up than weep holes formed by simply leaving the perp. joint open
  • Integral front grille prevents entry of large nest building insects into the cavity when using product 1143
  • 4mm wide front aperture prevents entry of large nest building insects into the cavity when using product TW1
  • Range of colours to blend with brick or mortar colour (products 1143 and TW1 only)
  • Can be made up to any length required using 50mm extension pieces part code 1144

Quality

  • Satisfies all NHBC Standards 2008 Edition
  • Manufactured to BS EN ISO 9001 : 2008
  • Complies with all relevant Building Regulations
  • Meets all relevant British Standards

Material & colour choice

  • Products 1143 and TW1 are injection moulded in UV stabilised polypropylene
  • Products 1146-1150 are extruded in UPVC (check availability)
  • Product 1143 is available in a choice of Buff, Terracotta, Grey, Brown, Black or White and to special order in Clear/Natural
  • Products TW1 is available as standard in a choice of Buff, Terracotta, or Grey and to special order in Brown, Black, Clear/Natural or White
  • Products 1146-1150 are available in grey only (check availability)

Products in this system

  • 1143 – a cavity wall weep/vent specifically intended for use with standard brick, block or stone external walls of thickness between 100-102.5mm
  • TW1 – a special low profile cavity wall weep specifically intended for use with standard brick, block or stone external walls of thickness between 100-102.5mm
  • 1146-1150 – a cavity wall weep/vent for use when a completely open weep hole is required, with no front grille, or for use where the external wall is more than 102.5mm in thickness (check availability).
  • 1144 – a cavity wall weep/vent 50mm extension piece , with no front grille. For use where the external wall is more than 102.5mm in thickness

Write a review

Your Name


Your Review Note: HTML is not translated!

Rating Bad           Good

Trustpilot