Stressline Steel Lintel SL110/RS Extreme Loading– 110-125mm Cavity Wall Lintel 2100 - 3500mm
Please Note this product may incur a delivery charge depending on area
APPLICATION : Rolled Steel (RS) and Rolled Steel Channel (RSC) fabricated lintels are designed for extreme loading conditions:
Concrete floor loads
Attic truss loads
Point loads: compound trusses, steel beams, etc ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTES. Additional installation requirements for RS and RSC type lintels
Lintels must be laterally restrained and adequately propped during construction at maximum 1.2 metre centres.
Props should not be removed until the mortar has cured. •
Minimum of 200mm bearing is required
MATERIAL Lintels are manufactured using 203x133x30kg/m UB or 230x90x32.2kg/m RSC with a 6mm welded bottom plate to BS EN 10025 – 2: 2004 of steel grade S275.
Lintels are coated as standard in a red-oxide
|Standard Length in (mm)||900-4800||5100||5400||5700||6000||6300||6600|
|Nominal Height "h" in (mm)||213||213||213||213||213||213||213|
|SWL 5:1 / 19:1 (kN)||82||77||72||67||64||60||58|
Write a reviewYour Name
Your Review Note: HTML is not translated!
Rating Bad Good