Stressline Steel Lintel SL90/RS Extreme Loading– 90-105mm Cavity Wall Lintel 5200 - 6600mm
Please Note this product may incur a delivery charge depending on area
APPLICATION : Rolled Steel (RS) and Rolled Steel Channel (RSC) fabricated lintels are designed for extreme loading conditions:
Concrete floor loads
Attic truss loads
Point loads: compound trusses, steel beams, etc ALWAYS CHECK LOADINGS AGAINST OUR LOAD-SPAN TABLE
INSTALLATION NOTES. Additional installation requirements for RS and RSC type lintels
Lintels must be laterally restrained and adequately propped during construction at maximum 1.2 metre centres.
Props should not be removed until the mortar has cured. •
Minimum of 200mm bearing is required
MATERIAL Lintels are manufactured using 203x133x30kg/m UB or 230x90x32.2kg/m RSC with a 6mm welded bottom plate to BS EN 10025 – 2: 2004 of steel grade S275.
Lintels are coated as standard in a red-oxide
Write a reviewYour Name
Your Review Note: HTML is not translated!
Rating Bad Good